1. Measure the height of your overhead
projector - then choose the height of shelf
and assemble according to diagram below.
Note: Platform is packaged flush with top
shelf for shipping purposes.
2. Note: Connect braces together with hex head
screws and nuts as shown to desired height to
all six support braces.
Press 3-outlet power cord into “U” bracket and feed remaining cord through grommet
hole and wrap remaining cord around cord wrap bracket. For safety and neat appearance,
secure plug to cord with plug snap.
3. Attach platform to bottom holes of
support braces with 8 -
1
⁄
2
˝ bolts. Flip
platform over before reattaching.
Inside Brace
Outside Brace
Cord
Grommet
Hole
Kep Nuts
Cord Wrap Bracket
Stove
Bolts
“U” Bracket
Grommet Hole
“U” Bracket
B -
Assembly for Platform Shelf
C -
Assembly for Electric
