72
3.4
Network Setting
In the Network Setting dialog box, click
OK
to accept the new settings, click
Cancel
to exit without saving,
and click
Default
to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(1) Server Name
Assign a name for the DVR unit. Letters of the alphabet and numbers only.
(2) Transmitting Cameras
Select and click on the camera number in the Transmitting Camera section you want to make it accessible
via internet using WebViewer, Remote Console, PDAViewer and HandyViewer (still image). To select all the
cameras, enable the
ALL
check box.
(3) Server IP
Set the Server IP and Remote Console Port number. The system will automatically detect your Server IP
address. You need this when accessing DVR server from the remote location via internet.
(4) Dynamic DNS (Domain Name System)
For information about Dynamic DNS options see
http://www.luxonvideo.com/quickstart201.php
and scroll
down to the DynDNS Section.
(5) Remote Control Server
Enable/disable remote control from remote application (ex. NVR-CMS). Enter the remote accessing port in
Port
column. The default value is 5555.
i
User also can manually run this function. To run, click
Start
>
Programs
>
DSS
>
Tool
>
Remote
Control Server
. The
remote control server icon appears on the taskbar when the remote
control server is enabled. (also see
Chapter 11
)
(6) Network Video Configuration
Set up the video quality and frame rate for viewing and transmitting to the remote program. Scrolling adjust
bar to set the
Quality level
and
FrameRate
level
.
(7) WebViewer Configuration
Activate
Enable Anonymous Login
to remotely access the DVR server without the need of password and
Talk to Web-Client
to use the 2-Way Talk feature that allows the client and server to talk via internet using
microphone. Make sure both microphone and speakers work before using this feature.