BELT DRIVE ANALOG PLAYER PD-171AL
15
Before Connecting
Before connecting other devices, connect the jack side of the
accessory power cable to the AC inlet of this unit.
When connecting, turn off the power switch of this unit and
the power supplies of auxiliary devices to prevent unexpected
accidents that may be caused by noise.
How to connect power supply
Use the accessory power cable and insert the AC plug in an
outlet on the wall in the room where the unit will be installed.
Connection to phono equalizer, integrated
amplifier, or others
Connect the pin plug of the phono cable supplied with the
tone arm to the phono terminal of a phono equalizer or an
integrated amplifier.
Connection of grounding conductor
Connect the grounding conductor of the phone cable sup-
plied with the tone arm to the signal ground terminal of a
phono equalizer or an integrated amplifier to be used.
Failure to observe this may induce hum noise on music signals.
