Luxman PD-171A, Owner'S Manual

Page: 13 / 28

BELT DRIVE ANALOG PLAYER PD-171A
11
4. How to mount counterweight
Face the stylus pressure gauge forward and insert the coun-
terweight into the back side of the tone arm until it clicks.
5. How to mount cartridge on headshell
No cartridge is included in this unit. Please mount your car-
tridge on the headshell. Connect the lead wires (see the
table below) to your cartridge and firmly secure the cartridge
to the headshell of this unit with the screws and nuts sup-
plied with the cartridge. If the cartridge is loosely secured,
hum noise may be generated. Refer to the operating in-
structions for your cartridge regarding terminals to be con-
nected.
White Lch+
Blue Lch–
Red Rch+
Green Rch–
The distance from the connection face between the head-
shell and tone arm to the tip of the stylus should be 52 mm.
Secure the cartridge by moving the cartridge straight along
the side face of the headshell and making the cartridge par-
allel to the headshell.
The overhang distance of the tone arm mounted on this unit
is 15 mm.
0
0.5
2.5
1
0
1
2
3
52mm
Stylus pressure graduation
Platter
Record board Armrest Arm pipe
Arm lifter Plug-in nut Height adjustment screw
of tone arm
Height adjustment
screw of arm lifter
（ ）