Luxman L-590AX, Owner'S Manual

Page: 19 / 28

INTEGRATED AMPLIFIER L-590AX
17
Procedure of timer-controlled recording
1.· Turn·on·the·operation·switch·to·activate·this·unit.
2.· Select·a·source·to·be·recorded·under·timer·control·with·
the·input·selector.
3.· Set·the·recording·switch·to·on.
4.· Perform· time· setting· for· start· and· stop· times· with· your·
timer.
5.· Refer·to·the·operating·instructions·of·the·timer·and·other·
connected·devices·for·further·information.
If the volume control is not set to low levels, the source
selected with the input selector may be reproduced from the
speakers. Be sure to set the volume control to a low level.
When timer-controlled recording is performed, operations of
the amplifier are the same as regular use.
Procedure of timer-controlled playing
1.· Turn·on·the·operation·switch·to·activate·this·unit.·
2.· Select·a·source·to·be·reproduced·under·timer·control·with·
the·input·selector.·
3.· Adjust·the·volume·level·with·the·volume·control.
4.· Perform· time· setting· for· start· and· stop· times· with· your·
timer.·
5.· Refer·to·the·operating·instructions·of·the·timer·and·other·
connected·devices·for·further·information.
Memory
This·unit·stores·the·following·items·when·the·power·is·off:
Item To·be·stored
INPUT Selected·source
METER on/off
MONITOR on/off
SUBSONIC on/off
MONO on/off
LOUDNESS on/off
LINE·STRAIGHT on/off
SEPARATE on/off
Memory reset
The·following·operations·restore·all·the·settings·to·the·factory·
defaults.
(1)·Turn·off·the·power·of·this·unit.
(2)·Hold· down· the· operation· switch· on· the· main· unit· for· 5·
seconds·or·more·and·press·the·line·straight·switch·on·the·
main·unit·once,·and·the·power·state·switches·from·on·to·
off.·
That’s·all·for·memory·reset.
·Factory·default
Item Default
INPUT LINE-1
METER on
MONITOR off
SUBSONIC off
MONO off
LOUDNESS off
LINE·STRAIGHT off
SEPARATE off