Luxman D-08, Owner'S Manual, Page: 23 / 54

20
1. Analog audio output terminals
(Unbalanced) / LINE
Connect these terminals to an unbalanced input
of such device as a preamplifier with a pin-plug
cable.
2. Analog audio output terminals
(Balanced) / BAL LINE
Connect these terminals to a balanced input of
an output device such device as a preamplifier
with a balanced cable.
The following are the polarities of analog audio
output terminals.
1. GROUND
2. COLD (–)
3. HOT (+)
3. Optical digital input terminals /
When using this unit as a D/A converter, con -
nect this terminal to such device as a recorder
that has a digital output terminal using an opti-
cal digital cable.
The following sampling frequencies are support-
ed: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz.
This terminal has a shutter. Direct the cable con-
nector correctly when inserting the cable into
the terminal. If the cable connector is inserted
forcibly with the wrong direction, the terminal
may be deformed, and the shutter may not be
able to close even after cable disconnection.
4. Coaxial digital input terminal /
COAX
When using this unit as a D/A converter, con -
nect this terminal to such device as a recorder
that has a digital output terminal using a coaxial
digital cable.
The following sampling frequencies are support-
ed: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz.
5 . Optical digital output terminal /
OPT
Connect this terminal to such device as an
amplifier that has a digital input terminal using
an optical digital cable. It is impossible to output
the digital audio signal when playing back the
HD layer of Super Audio CD.
This terminal has a shutter. Direct the cable con-
nector correctly when inserting the cable into
the terminal. If the cable connector is inserted
forcibly with the wrong direction, the terminal
may be deformed, and the shutter may not be
able to close even after cable disconnection.
8. Power cable terminal / AC IN
Connect the accessory power cable to supply
the power from the AC outlet on the wall.
SUPER AUDIO CD PLAYER D-08
6. Coaxial digital output terminal /
Connect this terminal to such device as an
amplifier that has a digital input terminal using a
coaxial digital cable. It is impossible to output the
digital audio signal when playing back the HD
layer of Super Audio CD.
COAX
7. Line Phase Sensor
Not functional for models whose power source is
AC 230 V.
OPT 1, OPT 2