Luxman C-900u, Owner'S Manual

Page: 27 / 36

CONTROL AMPLIFIER C-900u
25
(6) Press the ENTER switch to set the step back to the
step (2) to enable the L-Hi channel adjustment again.
(7) Pressing the PRESET switch allows the setting to be
memorized in any state of the steps from (1) through (5)
and the preset mode to end.
If no entry is performed for 1 minute in the preset mode,
the current mode ends with the immediately preceding
setting stored, and the regular display resumes.
10. Loudness switch (LOUDNESS)
Psychoacoustically compensates the frequency character-
istics when the volume control is set to -16 dB or less.
This compensation allows listeners to complement human
listening characteristics when the sound volume is in the
low level.
Every time this switch is pressed, the loudness setting tog-
gles between ON and OFF repeatedly.
The loudness indicator lights up when the loudness switch
is on.
When the line straight switch is set to ON, this switch does
not function.
11. Line straight switch (LINE STRAIGHT)
This switch is used to increase the purity of the sound qual-
ity by bypassing (skipping) the tone control circuit.
Every time this switch is pressed, the line straight setting
toggles between ON and OFF repeatedly.
The line straight indicator lights up when the line straight
switch is set to ON.
When the line straight switch is set to ON, the tone control
and loudness do not function.
12. Zoom switch (ZOOM)
Enlarges the current volume level and displays it.
When this switch is pressed again, the regular display re-
sumes.
PRESET
PRESET
▼
▲
PRESET
PRESET
PRESET
ENTER
ENTER
PRESET
ENTER
(Setting end)
Fig. 2