Luxman C-600f, Owner'S Manual

Page: 11 / 28

11
It is motor driven and can be adjusted from the remote control handset. The VOLUME
control does not affect recordings made using the Tape output (REC OUT) but will affect
the signal going to the Pre-amplifier output (Pre Out).
At this setting the volume is turned off. You can raise the volume using the

volume
button.
You should acquire the habit of lowering the volume, when changing between inputs or
before playing a record.
7. Mute (Volume).
Press the MUTE Button to temporarily lower the sound to the speakers.
Mute mode is indicated by the active Legend flashing.
Press MUTE again to restore sound. Mute does not affect recordings made using the Tape outputs
(REC OUT) but will affect the signal going to the Preamplifier output (Pre Out).
8.
Dimmer
(Display) Cycles through four levels of intensity:
Normal

Dim

Dimmest

Display Off

Normal.
9.
Preset
Cycles through three controls: LR Balance

BAL Phase

REC Out

LR
Balance
BALANCE Control will adjust the Balance between the Left and Right channels. Plus or
minus 8 dB.
MUTE
IN : BAL. -1
VOL: --d B
Rem ote Control