background image

 
 

2

 

 

 

TERMS AND CONDITIONS

  

1. 

LIMITED WARRANTY 
Luxman warrants the product designated herein to be free of manufacturing defects in material 
and workmanship, subject to the conditions hereinafter set forth, for a period of five (5) years 
from the date of purchase by the original purchaser or no later than six (6) years from the date 
of shipment to the authorized Luxman dealer, whichever comes first, excepting vacuum tubes 
which are warranted for 90 days only (See 6).  

2. 

CONDITIONS 
This Warranty is subject to the following conditions and limitations. The Warranty is void and 
inapplicable if the product has been used or handled other than in accordance with the 
instructions in the owner's manual, abused, or misused, damaged by accident or neglect or in 
being transported, or the defect is due to the product being repaired or tampered with by 
anyone other than Luxman or an authorized Luxman repair center. The product must be 
packed and returned to Luxman or an authorized Luxman repair center by the customer at his 
or her sole expense. Luxman will pay return freight of its choice. A RETURNED PRODUCT 
MUST BE ACCOMPANIED BY A WRITTEN DESCRIPTION OF THE DEFECT AND A 
PHOTOCOPY OF THE ORIGINAL PURCHASE RECEIPT. This receipt must clearly list model 
and serial number, the date of purchase, the name and address of the purchaser and 
authorized dealer and the price paid by the purchaser. Luxman reserves the right to modify the 
design of any product without obligation to purchasers of previously manufactured products 
and to change the prices or specifications of any product without notice or obligation to any 
person.  

3. 

REMEDY 
In the event the above product fails to meet the above Warranty and the above conditions have 
been met, the purchaser's sole remedy under this Limited Warranty shall be to return the 
product to Luxman or an authorized Luxman repair center where the defect will be rectified 
without charge for parts or labor, except vacuum tubes (See 6).  

4. 

LIMITED TO ORIGINAL PURCHASER 
This Warranty is for the sole benefit of the original purchaser of the covered product and shall 
not be transferred to a subsequent purchaser of the product.  

5. 

DURATION OF WARRANTY 
This Warranty expires on the third anniversary of the date of purchase or no later than the fifth 
anniversary of the date of shipment to the authorized Luxman dealer, whichever comes first.  

6. 

VACUUM TUBES 
Vacuum tubes are warranted for the original 90-day period only.  

7. 

DEMONSTRATION EQUIPMENT 
Equipment used by an authorized dealer for demonstration purposes is warranted to be free of 
manufacturing defects in materials and workmanship for a period of three (3) years from the 
date of shipment to the dealer. Vacuum tubes are warranted for 90 days.  

Warranty 

Summary of Contents for C-1000f





























Reviews: