9
Luxier
SP34-SS
Rev. A4 092017
7. Hang the unit on the wall to complete the
installation. Make sure the unit is seated prop
-
erly. Apply silicon sealant on left and right
sides of the shower panel. (
NOTE:
do not seal
the bottom of the panel, this will allow any
possible future leaks to drain out the panel)
8. Attache shower head. Apply some (
NOTE:
PTFE tape on the thread to prevent leaking)
Installation (cont.)
9. Connect hand shower hose to the main
panel body and connect hand shower to the
hose. Make sure to install the rubber washers
in the connections.
