7
Luxier
SP34-CEC
Rev. A 102019
Installation
1 2 3
1
2
3
4
5
1. Attach the adjustable shower arm assembly to the panel body.
Make sure to install screen washer to protect shower head from
debris in the plumbing system.
3. Lift the panel to determine the proper height and placement.
It is recommened to aim the top horizontal body jet to the chest
area for optimal showering experience. Mark the positions of
the 2 brackets on the wall and set a side the panel.
(
NOTE:
The distance between the two brackets should be 690
mm or 27.17”)
690mm
27.17”
3. Install hand shower cradle (1) to the shower panel by installing
the rubber washer (2) and the locking nut (3) and attach white
plastic hose tube connector (5) with PVC tubing to complete the
connection. (
NOTE:
Make sure the silicon gasket (4) is seated
properly inside the connector.)
1”
4. Using a drill with a tile bit, drill the hole slowly into the tile. Do
not drill into any piping or wiring in the wall. Insert the anchors
into the wall.
(
NOTE:
Before drilling the tiles, use a small piece of painters
tape or masking tape over the drill area. This will prevent dam
-
ages to the tiles)