10
Luxier
SP27-GS
Rev. A4 092017
Installation (cont.)
1
2
3 4
5
6
100
o
F
11. This LCD display is powered by running
water and 2 AA batteries. With the water
running on the shower panel. Press the small
button under the digital screen to display
current water temperature. The display will
automatically shutdown about 18 seconds
after the water is turned off.
10. For your convenience, a small screwdriver
(6) is included with the unit for battery
replacement. Use the screwdriver to remove
the 4 small screws (5) on the battery
compartment door (3). Please make sure 2
AA batteries (2) are properly installed in the
battery compartment (NOTE: batteries not
included). And make sure the silicon gasket
is seated properly to waterproof the battery
assembly. Once the batteries are install, press
down the main power switch (4) to provide
power to the digital display.
