Luxier
SP02-GS
Rev. A 122013
2
Thank you for purchasing Luxier products. Please read the information below and keep it for future
reference. If you require assistance, please contact us by email at [email protected].
Limited Warranty
Provided that the conditions for warranty eligibilities are met, this product is warranted to the original
purchaser for two (2) years from the date of purchase to be free of structural and mechanical defects
due to faulty materials or workmanship. This warranty does not cover any labor or service charges
associated with the removal, repair, or reinstallation of Luxier product. This express warranty does
not apply to products that have been damaged as a result of misuse, abuse, negligence, accident,
faulty installation or maintenance practice and/or used in any manner contrary to those recommended
by the manufacturer. If a structural or mechanical defect occurs during the warranty period, Luxier
USA will, as its option, (1) repair or replace the defective part(s) or product at no charge; (2) issue
a refund of the purchase price paid for the product (Valid within 30 days from the date of purchase);
or (3) issue a credit to be applied toward the purchase of a new Luxier product. Shipping/delivery
charges may apply and are in Luxier USA’s sole discretion. Warranty is only valid for Luxier products
purchased from Luxier USA. To be eligible for warranty coverage, the original purchaser must provide
valid copy of the invoice from Luxier USA.
For Warranty Service
To obtain service under the Limited Warranty, please contact the Luxier USA Customer Care
Department by email at [email protected]. Do not ship your product back to Luxier USA. The
Luxier USA Customer Care Department will decide whether to repair or replace your product, issue
a refund, or issue a credit. Luxier USA is dedicated to providing the best customer service. All emails
will be replied within one (1) business day
Attention
• Please READ ALL the instructions completely before installation.
• Always take extra precautions and wear appropriate safety equipment when installing this product.
• Proper water pressure needs to be maintained to prevent possible scalding.
You may also need the following tools
1. Thread Sealant Tape, (PTFE Tape)
5. Pencil or Marker
2. Silicon Sealant
6. Level
3. Phillips Screw Driver
7. Hammer
4. Drill with ¼” Drill bit
Preparation
1. Please make sure the water supply is shut off to the installation area. If necessary, shut off the
water to the entire house.
2. Close the water valve and turn off the power to the water heater.
3. Open the hot and cold water at a bathroom faucet to relieve the pressure in the plumbing system.
