4
KTS22 Rev.1 07/2018
Luxier USA
Installation
A. Shut off water supply at the valves.
Remove old faucet and clean the
mounting surface for installation of new
faucet.
B. Insert the hoses and shank through
the hole. The faucet hole on the mount
-
ing surface should be 1 1/2” in diameter.
A
C. Slide the Mounting Base and
the rubber washer onto the faucet
underneath the counter top.
Install the metal washer and secure the
faucet with the Brass Nut. Make sure the
faucet is properly mounted in place.
C
B
D1. Apply Teflon (TPFE) tape on the
shut off valves. Thread the tape in
counter-clockwise direction.
D2. Use an adjustable wrench to tighten
the water supply hoses, please do not
overtighten the connections.
E. Turn on water supply to check for
leaks at all connection. Remove spray
head from the pull out hose and let the
water run for about 1 minute and check
for leaks. Reattach the spray head.
D1
D2
E
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
28
01. Hex Wrench
02. Cap
03. Setscrew
04. Handle
05. Cap
06. Bonnet
07. Cartridge
08. Body
09. Spring
10. Pull Down Hose
11. Plastic Clip
12. Sprayer Head
13. Flange
14. Washer
15. Mounting Base
16. Rubber Washer
17. Water Supply Hoses
18. Metal Washer
19. Brass Nut
20. Mounting Rod
