3
Luxier Rev.1.2 09/2016
Attention
• This installation guide is subject to change without notice, please contact customer service de
-
partment to request the most updated version of this installation guide.
• This is a general installation guideline, actual installation may vary. Consult a professional if neces
-
sary.
• Please read all of these instructions carefully before installing your new faucet.
• Product drawings in this installation guide is for illustration purpose only. Actual product may vary
depends on model.
• Always take extra precautions and wear appropriate safety equipment when installing this prod
-
uct.
• Please follow all local building and plumbing codes.
You may need the following tools
Adjustable Wrench
Teflon (PTFE) Tape
Plumber’s Putty
Screwdriver
Silicone Sealant
Safety Glasses
Before You Begin
• Read and understand this instructions completely before installation.
• Unpack and inspect the products from the package for shipping damage and make sure all parts
are included with the product.
• Keep the product in its package until you are ready to install.
• Make sure the installation site is clean and free of dust and debris.
• Please make sure the water supply is shut off to the installation area. If necessary, shut off the
water to the entire house.
• Turn on the water at a bathroom faucet in the house to relieve the pressure in the plumbing
system.
Important Points
• Wrap all threaded connections, except the aerator in the spout, with Teflon tape. Always wrap in a
counter-clockwise direction.
• When installing your new faucet, first hand tighten the water supply hoses then use a wrench to
give the compression nuts an additional (1/4) turn. Do not over tighten the compression nuts as it
will reduce the integrity of the sealed connection.
