4
Luxier Rev.1.2 09/2016
Installation
B
20
21
22
C
A. Shut off water supply at the valves.
Remove old faucet and clean the
mounting surface for installation of new
faucet.
D. Install counter weight (24) onto pull
out hose (13). Connect the pull out
hose to water inlet tube (26). Be sure
to install rubber washer (27). Do not
overtighten the connection.
F. Turn on water supply to check for
leaks at all connection. Remove spray
head from the pull out hose and let the
water run for about 1 minute and check
for leaks. Reattach the spray head.
E1. Apply Teflon (TPFE) tape on the shut
off valves. Thread the tape in counter-
clockwise direction.
E2. Use Wrench to tighten the water
supply hoses, please do not overtighten
the connections.
B. Insert the hoses and shank through
the hole. The faucet hole on the mount
-
ing surface should be 1 1/2” in diameter.
C. From under the sink, install the steel
washer (21), and nut (22) onto the
shank (20) Tighten the nut to secure the
faucet to the mounting surface.
24
13
13
26
27
D
E1
Flexible water supply line
E2
F
01. Temperature Indicator
02. Screw
03. Handle
04. Cap
05. Bonnet
06. Cartridge
07. Seat
08. Sprayer
09. Washer
10. Check Valve
11. Sprayer Connector
12. Retainer
13. Pull Out Hose
14. Spout
15. O Ring
16. Locking Ring
17. Body
18. Flange
19. EVA Washer
20. Shank
21. Steel Washer
22. Nut
23. Guide
24. Counter Weight
25. Water Supply Hoses
26. Water Inlet Tube
27. Rubber Washer
A
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
