LXMH10002
V. 01 – 03/12/2015
6
©Velleman nv
DMX-512 Connection
When applicable, connect an XLR cable to the female XLR output of a controller (not incl.) and the
other side to the male XLR input of the device. Multiple devices can be linked through serial linking.
The linking cable shall be a dual core, screened cable with XLR input and output connectors.
A DMX terminator is recommended for installations where the DMX cable has to run a long distance or is
in an electrically noisy environment (e.g. discos). The terminator prevents corruption of the digital
control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω resistor
between pins 2 and 3, which is then plugged into the XLR output socket of the last device in the chain.
terminator
How to turn the controller line from 3-pins into 5-pins (plug and socket).
6.
Operation
The device can be used in the following modes:
stand-alone mode
master/slave mode
with a DMX-512 controller.
6.1
Control Panel
Access the control panel functions using the four panel buttons located around the display:
Button
Function
MENU
access the menu
return to a previous menu option
ENTER
select menu option
store the current menu or option within the menu
