LXLP10106
V. 01 – 05/01/2016
4
©Velleman nv
3.
General Guidelines
Refer to the
Velleman® Service and Quality Warranty
on the last pages of this manual.
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 1" (± 2.5 cm)
in front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the
device.
Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
Mechanical wear and LEDs are not covered by warranty.
A qualified technician should install and service this device.
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
This device is designed for professional use on stage, in discos, theatres, etc. The device should only
be used indoors with an alternating current of 110-220 V~, 50/60 Hz.
Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives.
Use the original packaging if the device is to be transported.
Keep this manual for future reference.
4.
Features
PAR projector with high-power RGBW LEDs
extremely slim design
smooth dimming modes for perfect colour mixing
DMX control:
o
4 channels: RGBW
o
6 channels: RGBW, dimmer and shutter
o
10 channels: RGBW, dimmer, colour temperature, shutter, auto, speed, dimming curves
built-in programmes
double bracket: can be used as a floor spot
sound activated via built-in microphone
with RDM function
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
display with control buttons
5
fuse
2
3-pin XLR input and output
6
adjustment knob
3
5-pin XLR input and output
7
bracket
4
powerCON input and output
