LX114
V. 01 – 18/09/2014
6
©Velleman nv
7.1
Control Panel Navigation
Access the control panel functions using the four panel buttons located directly underneath the
display
[6]
. From left to right:
button
function
MENU
used to access the menu or to return to a previous menu option
UP
scrolls through the menu options in ascending order
DOWN
scrolls through the menu options in descending order
ENTER
used to select and store the current menu or option within the menu
7.2
Stand-Alone Mode
In stand-alone mode, the device runs one of the built-in programs. You can also select one of the built-in
static white colours (various colour temperatures), or define your own custom white colour. You can use
a strobe effect with the custom white colour.
Note:
Make sure to unplug any connection from the DMX input of the device if you want to use it in
stand-alone mode. A device in stand-alone mode may transmit DMX signals that could interfere with the
DMX signals from the controller.
Stand-Alone Mode with Built-in Static Colour
To use one of the built-in static colours:
1.
Unplug any connection from the DMX input
[3]
of the device.
2.
Press MENU until <STATIC> is displayed and press ENTER.
3.
Select <FIX C> with UP or DOWN.
4.
Press ENTER to confirm.
5.
Select the desired preset colour with UP or DOWN. Press ENTER to confirm.
6.
Press MENU to quit.
Note:
The manual mode (MANU C) allows to combine warm white and cold white.
1.
Press MENU until <STATIC> is displayed and press ENTER.
2.
Select <MANU C> with UP or DOWN. Press ENTER to confirm.
3.
Select <W> (warm white) or <C> (cold white) with UP or DOWN. Press ENTER to confirm.
4.
Set the value from 0 to 255 with UP or DOWN. Press ENTER to confirm.
5.
Press MENU to quit.
Stand-Alone Mode with Built-in Program
To set the device to stand-alone mode with a built-in program:
1.
Unplug any connection from the DMX input
[3]
of the device.
2.
Press MENU until <AUTO> is displayed and press ENTER.
3.
Use UP or DOWN to select a built-in program (AUTO 1 to AUTO 5) and press ENTER to confirm.
The current program speed appears.
4.
Use UP or DOWN to set the speed from slow (0) to fast (100) and press ENTER to confirm.
5.
Press MENU to quit.
Note:
Programmes AUTO 1 to AUTO 5 are fully pre-programmed and will not be altered by changes.
7.3
Master/Slave Mode
The master/slave mode allows connecting several devices to a single master device. All slave devices will
then work synchronously with the master device.
You need to set one device to master mode and all other devices to slave mode.
1.
Connect all devices in series with DMX cables.
2.
The first unit in the chain functions as the master device. Set up the unit as described in Stand-
Alone Mode.
3.
On each slave device, press MENU until <M&S> is displayed and press ENTER.
4.
Use UP or DOWN and select <SLAVE> and press ENTER
5.
Use UP or DOWN to set the DMX starting address to <d1> and press ENTER.
6.
Repeat for each slave device.
