LX112
V. 04 – 08/09/2014
5
©Velleman nv
7.2
Stand-Alone Mode
In stand-alone mode, the device runs one of the built-in programs. You can also select one of the built-in static
white colours (various colour temperatures), or define your own custom white colour. You can use a strobe
effect with the custom white colour.
Note:
Make sure to unplug any connection from the DMX input of the device if you want to use it in stand-
alone mode. A device in stand-alone mode may transmit DMX signals that could interfere with the DMX signals
from the controller.
Stand-Alone Mode with Built-in Static Colour
To use one of the built-in static colours:
1.
Unplug any connection from the DMX input
[9]
of the device.
2.
Press MENU until <C--> is displayed and press ENTER.
3.
Use UP and DOWN to select a pre-set colour (C-01 to C-03).
4.
Press ENTER to confirm.
5.
Press MENU to quit.
Stand-Alone Mode with Custom Static Colour
You can create a custom colour by adjusting the intensity of the cold white (C) and warm white (W) LEDs.
To use a custom static colour:
1.
Unplug any connection from the DMX input
[9]
of the device.
2.
Press MENU until <U--> is displayed and press ENTER.
The last set value appears, for example <W215> = warm white LEDs intensity value = 215.
3.
Use UP and DOWN to set the intensity (0–255) and press ENTER.
The cold white LED value appears, for example <C000> = cold white LEDs intensity value = 000 (off).
4.
Use UP and DOWN to set the intensity (0–255) and press ENTER.
The strobe speed value appears.
5.
Use UP and DOWN to set the strobe speed from slow to fast (0–20). Set to 0 to switch off the strobe.
6.
Press ENTER to confirm.
7.
Press MENU to quit.
Stand-Alone Mode with Built-in Program
To set the device to stand-alone mode with a built-in program:
1.
Unplug any connection from the DMX input
[9]
of the device.
2.
Press MENU until <P--> is displayed and press ENTER.
3.
Use UP and DOWN to select a built-in program (P--1 to P--5) and press ENTER to confirm.
The current program speed appears.
4.
Use UP and DOWN to set the speed from slow (0) to fast (100) and press ENTER to confirm.
5.
Press MENU to quit.
Dimmer Modes
You can choose a dimmer mode to control the colour transitions in the automatic programs. The dimmer mode
has no effect on static colours.
To set the dimmer mode, proceed as follows:
1.
Press MENU until <dIM> is displayed and press ENTER.
2.
Use UP and DOWN to select the desired setting:
o
<OFF>: dimmer off, for abrupt colour transitions.
Note
: In master/slave mode, set the dimmer to <OFF> on the slave device if you want the slave
device to use the same dimmer mode as the master device.
o
<DIM1>–<DIM3>: dimming modes 1 to 3, for smooth colour transitions.
3.
Press ENTER to confirm.
After changing the dimmer mode, you have to reactivate the automatic program, as follows:
4.
Press MENU until <P--> is displayed and press ENTER.
5.
Use UP and DOWN to select the desired program and press ENTER.
6.
Press MENU to quit.
