background image

 

 

 

Product Name: 

33.5in. H Cascading Rock Outdoor Fountain 

SKU #: 

WHF616 

 

Contact: [email protected] 

Instruction Manual 

Please save this manual for future reference. 

 

Note: The above diagram is for illustrative purposes only.   
 

Pump Instructions:   

Special Warnings and Cautions:

 

 

CAUTION:

 

 

The pump has been evaluated for use with water only. 

 

Risk of electric shock. Do not remove cord and strain relief. Do not connect conduit to pump.   

 

Do not use the pump in water exceeding 30ºC / 86ºF. 

 

Do not use the pump in flammable liquids.   

 

Do not use the pump for industrial purposes.   

 

Do not use the pump in vehicles or on ships or aircraft or swimming pools.     

 

Do not use the pump in location where special conditions prevail, such as the presence of a corrosive or 

explosive atmosphere (dust, vapor or gas).

 

 

Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling. 

 

Do not lift the pump by its power cord. 

 

Keep the plug dry. Do not expose the plug to water or steam. 

 

Before connecting to the power source, make sure that the pump is assembled and completely submerged 
in water. 

 

Always disconnect the pump from the power source before performing any maintenance on the pump, 

lights (if equipped), or fountain.

 

 

Do not exceed the voltage shown on the pump. 

Summary of Contents for WHF616

Page 1: ... of your fountain 3 Place the fountain on a flat level surface From the opening at the back of the fountain base insert the water supply tube into the pump outlet Place the pump upright in the basin and draw the pump power cord out of the fountain back 4 Add clean water into the basin The water level should be approximately 30mm lower than the edge of the basin 5 Connect the pump power cord to a g...

Page 2: ...pump for industrial purposes Do not use the pump in vehicles or on ships or aircraft or swimming pools Do not use the pump in location where special conditions prevail such as the presence of a corrosive or explosive atmosphere dust vapor or gas Do not let the pump run dry Pump must be completely submerged for proper operation and cooling Do not lift the pump by its power cord Keep the plug dry Do...

Page 3: ...e damage may occur WARNINGS 1 To reduce the risk of electric shock connect only to a properly grounded grounding type receptacle 2 To reduce the risk of electric shock use only on portable self contained fountains no larger than 5 feet in any dimension 3 Do not exceed the voltage shown on the pump 4 Always disconnect the pump from the power source prior to beginning any maintenance or work on the ...

Page 4: ...se a soft cloth or brush to clean the area inside of the pump where the impeller rotor assembly was Clean the inlet screen impeller housing impeller in warm soapy water Reassemble the pump and inspect for proper operation TIPS AND TROUBLESHOOTING 1 Ensure that the pump s flow control switch is set to maximum before operating Once the flow is established the pump can be adjusted downward to the des...

Reviews: