Product Name:
Christmas Trees
SKU #:
WH138 (pre-lit), WHAP341 (no lights), WHAP342 (pre-lit), WHAP685 (pre-lit)
Contact: [email protected]
Instruction Manual
Please save this manual for future reference.
Assembly and Instruction Procedure:
Every carton should contain a top section and a bottom section (larger trees include middle sections).
This will depend on what model you have purchased. Also included is a metal base. Remove all Packaging (i.e.
cardboard or plastic) before beginning.
1.
Choose a location where the tree is to be displayed. Take out the tree stand. Metal stand unfold as “X”
shaped as Figure 1, place it on a flat surface.
2.
Insert the pole with tapered end of the tree bottom into the tree stand and tighten the 3 screws on the
stand.
3.
Insert the middle tree section into the tree bottom and push down into position. (Note: This does not apply
to trees with only 2 sections.)
4.
Insert the tree top into the middle tree section and push down into position as Figure 2.
5.
Gently lower all main branches on tree sections (figure 3). Take care not to place unnecessary pressure on
the brackets when assembling. The branches on your tree can be adjusted to give tree the desired amount of
fullness. For best results, straighten and separate all branch tips, then bend
them slightly upward (figure 4).
6.
CONNECTING THE STRINGS WITH POWER (see Figure 2): If there is power supply cord, please find the power
supply cord on the bottom section. Follow the method below: carefully connecting the plug to end-connector
by
A
to
A
, and
B
to
B
. And then plug tree lights into a power outlet.
YOUR TREE IS NOW READY TO ENJOY!
Figure 4
Figure 3
Figure 2
Figure 1
