The main menu is shown below.
Ethernet Menu
The Ethernet menu is shown below:
OM1004 Ethernet Menu
1 Show ethernet status
2 Show switch interface and port registers
3 Show switch global registers
4 Show port packet statistics
Esc Back
:>
This menu shows status and statistics for each port. The ports are plug and play, so there are no
configuration options. Ethernet menu item 1 shows the link status of all ports; items 2 and 3 are for
factory diagnostic use only; item 4 shows the traffic statistics for each port.
Here is a sample of the information available in this menu:
OM1004 Ethernet Menu
1 Show ethernet status
2 Show switch interface and port registers
3 Show switch global registers
4 Show port packet statistics
Esc Back
:> 1
Ethernet Status
Port 1 2 3 4
Switch Port P1 P4 P6 P5
Type Electrical Optical Optical Optical
Media Copper Fiber Fiber Fiber
Link Good Yes No No No
Auto-Negotiation Enabled Enabled Enabled Enabled
Speed 100BASE-TX 1000BASE-X 1000BASE-X 1000BASE-X
Duplex Full-Duplex Not available Not available Not available
MDI/MDI-X MDI NA NA NA
:> 4
Enter switch port (1 - 6): 1
Packet Statistics for Port P1 (cleared when read)
InGoodOctestsLo: 1686, InGoodOctestsHI: 0
InBadOctets: 0, OutFCSErr: 0
InUnicast: 0, Deferred: 0
InBroadcasts: 22, InMulticasts: 0
64Octets: 22, 65 to 127Octets: 8
128 to 256Octets: 0, 256 to 511Octets: 0
512 to 1023Octets: 0, 1024 to MaxOctets: 0
OutOctetsLo: 512, OutOctetsHi: 0
OutUnicast: 0, Excessive: 0
OutMultcasts: 8, OutBroadcasts: 0
Single: 0, OutPause: 0
InPause: 0, Multiple: 0
InUndersize: 0, InFragments: 0
InOversize: 0, InJabber: 0
InRXErr: 0, InFCSerr: 0
Collisions: 0, Late: 0
5