To close the vanes and raise the shading:
1. Pull the cord straight down with long strokes. Pull the
cord with shorter strokes to tilt the vanes.
2. With each stroke, the vanes close or the shading
partially raises.
3. Allow the cord to retract completely into the headrail
after each downward stroke.
4. Use multiple strokes until the shading reaches the
desired position. The shading can be stopped at any
point while raising.
LiteRise operation
To lower the shading:
1. Slowly and steadily pull down on the bottom rail
handle to lower.
To open the vanes:
1. With your thumb on the front of the handle and
fingers on the back, gently pull the back of handle
down and away from the shading to open the vanes.
2. Use the handle to tilt the vanes to the desired open/
closed position.
To raise the shading:
1. Push down on the front of the handle to close the
vanes. Then slowly and steadily push up on the
handle to raise.
Summary of Contents for Silhouette Shadings
Page 2: ...Silhouette Shadings...
