INSTALLATION
5
Mount the Installation Brackets — Inside Mount
■
Measure 50mm from each jamb for bracket location.
➤
If more than two installation brackets came with your order, space additional bracket(s) evenly
between the two end brackets and mark their location. Mount into wood whenever possible.
■
Centre the brackets on your marks, then mark the screw holes.
➤
The minimum casement depth for mounting the installation brackets is 6mm. Mark both of the
winged screw holes with shallow mounting depths.
➤
The minimum casement depth for a fully recessed mount 20mm cell sizes. Mark the center
screw hole when depth permits.
IMPORTANT:
The front edges of the brackets must be level and aligned to each other.
■
Drill the screw holes using a 3mm drill bit.
CAUTION:
Use drywall anchors when mounting into drywall.
■
Use a level to check that the mounting surface is level. Shim the brackets if necessary.
■
Attach the installation brackets using the screws provided.
Proceed to “Install the Shade” on page 9.
50mm
Space Evenly
Jamb
Jamb
Space Evenly
50mm
Minimum
6mm
Use Center Hole
When Depth Permits
