LUXCANADA.CA
14
TM
3.
Align the holes of the support plate with the two screws in the ceiling. Push upward so the top supporting
plate locks into place. Fasten the two existing hexagonal wood screws, then insert two more in the last two
holes and fasten them.
MAKE SURE THE SUPPORT FRAME FIXTURE IS SECURE BEFORE RELEASING !
4.
As shown below, slide in both upper chimney and lower chimney, paying extra attention to sharp edges on
the chimney. Minimize chimney movements to avoid scratches on the chimney. You may use a screwdriver to
prevent them from sliding down, as illustrated.
MAKE SURE THE SCREWDRIVER CAN WITHSTAND THE WEIGHT !
SEVERE INJURY
Hood may have very sharp edges. Please wear protective
gloves if it is necessary to remove any parts for
installation, cleaning or service.
Summary of Contents for KI30LCD
