9
Remaining risks
There will still be residual risks even when the device
is used according to the instructions and under
observation of all of the safety notes in this set of
operating instructions:
• Touching the tool in the uncovered section.
• Reaching into the operating tool.
• Kickback from work pieces and work piece
parts.
Personal protective clothing
Your device at a glance
1.
Stroke regulator
2.
Locking screw for cutting angle
3.
Switch for pendulum stroke
4.
Saw blade
5.
Foot plate
6.
Dust protection
7.
LED
8.
On/Off switch
9.
Locking button for permanent operation
10. Switch for blower
11. Locking screw for parallel stopper
12. Storage compartment for saw blade
13. Opening for extraction strut
Scope of delivery
• Jig-saw
• Saw blade
• Parallel stopper
• Extraction strut
• Operating instructions
Using for the first time
Fitting the saw blade
Suitable saw blades:
– Pull the locking sleeve (14) backwards and hold.
– Place the saw blade (4) as far as it will go into the
holder.
– Release the locking sleeve (14).
– Ensure that the blade is securely fitted into
place.
Affixing the extraction strut
– Fit the extraction strut (15) into the opening (13)
as shown.
Operation
Check before switching on!
Check to make sure the unit is in a safe operating
condition:
– Check to make sure there are no visible defects.
– Check to make sure all unit components are cor-
rectly mounted.
Switching on and off
– Switching on: Press the On/Off button (8).
– Switching off: Release the On/Off switch.
– Permanent operation: Press the locking button
with the On/Off switch (9) held down.
– Set the required stroke rate with the rotating reg-
ulator (1).
Wear goggles when working with the de-
vice.
Wear ear defenders when working with the
device.
When working with tools that cause con-
siderable dust, wear a dust protection
mask.
Do
not
wear protective gloves when work-
ing with the device.
Wear tight fitting clothes when working
with the device.
If you have long hair, cover or wear a hair
net.
WARNING! Risk of death through elec-
tric shock!
The use of this variant outside
Switzerland is not permissible for safety
reasons, as this poses a risk of electric
shock or fire.
The variant of the product sold in Switzer-
land may only be used in Switzerland, as it
is equipped with a Swiss plug.
You can identify the variant by means of the
item number on the product (the instruc-
tions always contain
all
item numbers):
Item number Switzerland: 381 124
Item number in other EU countries: 398 094,
301 321
DANGER! Risk of injury!
Pull out the
power plug before conducting any mainte-
nance work on the device.
Shortly after sawing, the saw blade may be
very hot. Risk of burning! Allow a hot blade
to cool down. Never clean a hot saw blade
with flammable liquids.
Even a saw blade which is at a standstill
can still cut! Always wear gloves when
replacing the saw blade.
GB
Stichsaege_381124_398094_301321.book Seite 9 Mittwoch, 16. September 2015 2:19 14
