Lux Tools 468404, Original Instructions Manual

Page: 34 / 100

34
• Symbols appearing on your device may
not be removed or covered. Signs on the
device that are no longer legible must be
replaced immediately.
Personal protective equipment
Your product at a glance
►
P. 3, item 1
1. Screw
2. Headlights
3. Discharge chute
4. Adjustment crank for discharge chute
5. On-Off switch
6. Mains plug
7. Guide pin
8. Wheels
Scope of supply
• Instructions for use
• Screw casing
• Guide pin-upper part
• Guide pin-middle part
• Adjustment crank for discharge chute
Assembly
►
P. 4, item 2
– Position the guide pin (9) onto the bottom
part of the guide pin (10) and push
through the carriage bolts (11). The eye-
let (13) must face upwards.
– Position the toggle nuts (12) and tighten.
►
P. 5, item 3
– Position the guide pin (14) onto the mid-
dle part of the guide pin and push through
the carriage bolts (11).
– Position the toggle nuts (12) and tighten.
– Push adjustment crank (4) and fasten
with knurled screw (15) as shown in the
figure.
Read and observe the instructions
for use before using the product for
the first time.
Danger due to foreign bodies being
thrown out.
Maintain a safe distance from per-
sons standing around.
Never put the hands inside the dis-
charge chute.
Never put feet near the rotating
screw.
Never remove clogging in the dis-
charge chute using hands.
Remove the plug from the mains
immediately if the cable is damaged
or cut.
Shut off device before all mainte-
nance or cleaning work.
Touch parts only then when they
are completely stopped.
Wear hearing protection when
working with the product.
Wear protective goggles when
working with the product.
Wear sturdy shoes when working
with the product.
Wear protective gloves when work-
ing with the product.
Wear tight-fitting clothing when
working with the product.
STOP
Note:
If a part is missing or damaged,
please contact the vendor.
GB
Schneefraese_468404.book Seite 34 Donnerstag, 15. Mai 2014 6:59 06