Lux Tools 468273, Original Operating Instructions, Page: 6 / 28

6
GB
GB O
riginal operating instructions
Table of contents
Getting started … .............................................. 6
For your safety ................................................... 6
The product at a glance .................................... 9
Unpacking and assembly ............................... 10
Using for the first time .................................... 10
Cleaning and maintenance ............................. 11
Storage and transport ..................................... 12
Disposal ............................................................ 12
Troubleshooting ............................................... 12
Technical data .................................................. 12
Getting started …
Proper use
The product is not intended for commercial use.
Any improper use or any activities on the product not
described in these instructions for use are conside-
red inadmissible misuse and outside of the
manufac-turer's legal liability.
What do the symbols mean?
In the instructions for use
Hazard warnings and information signs are clearly
marked in the instructions for use. The following
symbols are used:
Symbols on the device
Symbols appearing on your device may not be remo-
ved or covered.
Signs on the product that are no longer legible must
be replaced immediately
For your safety
General safety instructions
• For safe handling of the product, the user must
have read and understood the instructions for
use before using it for the first time.
• Observe all safety instructions! If you do not
observe the safety instructions you will endanger
yourself and others.
• Keep all instructions for use and safety instruc-
tions for future reference.
• Attach the instructions for use, if you pass on the
device.
• Keep the device away from children. Store the
device in a place where it is safe from children
and unauthorized persons.
• All parts of the device, especially safety devices,
must be correctly installed to ensure faultless
operation.
• Conversions, unauthorized modifications and
the use of non-approved parts are prohibited.
• The device may be used only when in a faultless
condition. If the device or part of the product is
defective, have it repaired by an expert.
• Always heed the applicable national and interna-
tional safety, health and labour regulations.
• The device may only be put into operation if no
faults are found during the check-up. Ensure
that any defective parts are replaced before the
product is used again.
• When the device has been turned off, always
secure it to prevent accidental switching on.
• Always, make sure that the standing position is
natural and secured while working.
• Do not overload the device. Use the device only
for the purposes for which it is intended.
• Persons unable to safely and carefully use the
device due to physical, psychological and neural
reasons must not use the device.
• Work with caution and only if you are physically
fit: Working under the effects of fatigue, illness,
alcohol, medication and drugs is irresponsible,
as you are unable to use the device safely.
Operation/workplace
• No tools, objects or cables may be left lying in
the work area around the device.
• Ensure that there is sufficient lighting during
operation.
• The immediate environment must be free of
highly flammable and explosive materials.
Read the instructions for use before use.
Observe all safety information.
DANGER! Type and source of danger!
Failure to observe the hazard warnings
can put life and limb at risk.
WARNING! Type and source of danger!
Failure to observe the hazard warning can
put life and limb at risk.
CAUTION! Type and source of danger!
This danger sign warns against damage to
the product, environment or other pro-
perty.
Note: This symbol identifies information
that is provided to improve understanding
of the processes.
468273_Trimmer_Elektrisch.book Seite 6 Dienstag, 10. November 2015 10:54 10