Using an electrical suction hose (optional extra)
In addition to the standard hose, it is also possible to
connect an electrical suction hose to the appliance.
This electrical hose gives you the opportunity to
connect electrical appliances to your vacuum cleaner.
Connecting the electrical suction tube:
Push the electrical suction tube on to the connection
section of the hand grip till the tube locks into position.
Note:
To remove the electrical suction tube, push the
unlocking button located at the end of the electrical
suction hose and pull the connected sections apart.
Switching ON and OFF:
After your
LUX luna
has been connected to the
power supply, by pressing the on/off switch lightly, the
green operating mode light (Power) illuminates on the
appliance.
You can change the power levels of your
LUX luna
by using the slide switch on the electrical suction hose.
This slide switch provides a secure selection of one of
the four suction power levels. Select the appropriate
power level between ‘A’ and ‘3’.
Performance Level
Type Of Floor
A
Automatic
rugs
carpets
1
rugs
carpets
fitted carpets
2
heavy soiled fitted carpets
3
hard floors
above-floor areas
special carpets (needled felt, looped carpets)
Should it be difficult to move the nozzle over your carpets, you have perhaps
selected a power level that is too high. Please, reduce the power on the Lux
Luna
to the level ‘1’.
Summary of Contents for LVCL-3
Page 1: ...Instruction Manual LVCL 3 ...
