StarPole
LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM
p.17/23
T: +32 3 293 35 50
–
www.lux-lumen.com
6
External connections
6.1
DC power input
Safety precautions
Never connect the live power on the input terminals of the StarPole led-luminaire!
In case of doubts, contact your supplier.
Polarity
The StarPole luminaire is polarity sensitive. However the led-units are provided
with a Higo connector, it is advised to observe polarity and cabling if necessary:
•
Red inner conductor = positive
•
Black inner conductor = negative
Improper connection might damage the StarPole luminiare and power supply
permanently. In case of inversed polarity, the warranty is void.
Power supply: Rated voltage
The rated input voltage range of the StarPole luminaire is 24 VDC. Due to the use
of a step down-convertor, integrated in the housing, a highly efficient system is
created.
Cable
The cable used in the StarPole is 4x#0,5mm with a XLR 5p connector on top and a
wago 5 connector at the bottom. It is possible to extend the cable with a cable
4x#1,5mm of maximum 25m to the 6 channel led-driver.
Lux Lumen cables are available with length 1m, 2m, 3m, 4m, 5m, 10m and 20m.
6.2
Battery Unit
Preferred battery charger:
➢
Meanwell PA-120N-27c
110V or 220V, selectable by switch on charger, to be set by Lux Lumen.
Battery:
In order to charge the battery, first connect the XLR to the battery, than plug
in the power 220V.
Autonomy (from maximum load): max.12 hours
Time to fully charge empty battery:
10 hours
Summary of Contents for StarPole
Page 1: ...StarPole...
