10
SET TIME
•
Hold this clock button (4) until you see the time display blinking. Set the hours by using the
‘+/-‘ button (1 & 2) and press again on the clock button (4) to confi rm.You will now see the
minutes blinking on the time display
•
Set the minutes with the ‘+/-‘ button and press again on this clock button (4) to confi rm. You
will now see the the 12/24 blinking on the display.
•
Choose between a 12- or 24-hours format while using the the ‘+/-‘ buttons (1 & 2) and press
again on this clock button (4) to confi rm.
SET ‘OK TO GET UP’ ALARM
•
Press once on the alarm button (5) if you wish to see what time the alarm is set
•
Hold the button until you see the time display blinking. Set the hours with the ‘+/-‘ button
and press again on this button (5) to confi rm.You will see the minutes blinking on the time
display
•
Set the minutes with the ‘+/-‘ button and press again on this button (5) to confi rm.‘ON’ will
appear on the display. Press again on this button (5) to confi rm or use the ‘+/-‘ buttons (1
& 2) for ‘OFF’ if you wish to deactive the alarm.Then press again on the alarm button (5) to
confi rm.
Good to know!
By choosing ‘OFF’, it gives (the) parent(s) the option to still use the nightlight without
having to shut of the penguin completely.
30 minutes prior to the alarm, the penguin will light up gradually to warm light. When it’s time to
get up the penguin will turn green. This is the ‘ok’ sign for children to get out of their bed. Press
any button to turn off the green light.
SWITCH BETWEEN WARM OR BRIGHT LIGHT
•
Switch between warm or bright light by pressing on this button (3). The brightness can be
adjusted by pressing on the head of the penguin as mentioned before on ‘how to use’.
KEYLOCK
•
Press and hold the color nightlight switch (3) and alarm setting button (5) at the same time
to lock all buttons. ‘ON’ will appear on the display. Press and hold these two buttons again to
unlock all buttons. You will see ‘OFF’ on the display.
•
When the key lock has been activated and the alarm has been set as ‘ON’ as mentioned
before on ‘how to use’, the penguin will still light up in green when the slide button (6) has
been turned to OFF. This to prevent the child(ren) from shutting of the penguin sleep trainer
completely. Should you wish to deactivate the alarm light, following the instructions men-
tioned before on ‘how to use’.
Good to know!
Tapping on the head of the penguin to activate the light is still possible as this
doesn’t aff ect the alarm settings of the penguin.
