20
4. MENU OPTIONS
4.1.1
Adding cameras
The supplied camera is already paired with the monitor, there is no need to do this
again unless the connection is lost. Follow the steps below to pair an additional camera
with the monitor, or to pair the camera again:
Note: If the
symbol is displayed next to a camera channel, it means that a camera is
already properly paired with the monitor on this channel. Pair a new camera on a camera
channel without the
symbol.
1.
Press the menu / Ok button on the monitor to display the menu on the screen. (see
Fig. 2)
2.
Use the , , , buttons to select the camera icon in the menu.
3.
Press the menu / Ok button to open the camera submenu. Select the camera chan-
nel to which you want to pair the camera with the , buttons.
4.
Press the menu / Ok button to select the channel, use the , buttons to select the
add camera icon
, then press the menu / Ok button
5.
Press the PAIR button on the back of the camera while the hourglass icon is
displayed on the screen.
6.
If the pairing is successful, the icon appears on the screen. If the pairing is not suc-
cessful, repeat the above steps.
4.1.2
Remove a camera
1.
Press the menu / Ok button on the monitor to display the menu on the screen. (see
Fig. 2)
2.
Use the , , , buttons to select the camera icon in the menu.
3.
Press the menu / Ok button to open the camera submenu. Select the camera chan-
nel of which you want to remove the camera with the , buttons.
4.
Press the menu / Ok button to select the channel, use the , buttons to select the
remove camera icon
then press the menu / Ok button
5.
Select the
symbol
with the , buttons to remove the camera.
6.
Press the menu / Ok button to confi rm the selection.
4.2.1
Temperature unit setting
1.
Press the menu / Ok button on the monitor to display the menu on the screen. (see
Fig. 2)
2.
Use the , , , buttons to select the temperature icon in the menu.
3.
Press the menu / Ok button to open the temperature setting submenu.
4.
Select ˚C of ˚F with the , buttons.
5.
Press the menu / Ok button to confi rm the selection.
6.
Press the button to exit the menu.
Note: The temperature detection range is 0 ~ 40 ˚C.
4.2.2
Temperature alarm settings
1.
Use the , , , buttons to select the termperature alarm icon
to activate the
temperature alarm. Press the menu / Ok button to confi rm.
2.
Use the , , , buttons to select the termperature alarm off icon
to deactivate
the temperature alarm. Press the menu / Ok button to confi rm.
4.2.3
Set temperature high and low warnings
1.
Select (red, high) or (green, low) with the , buttons to set the temperature
maximum / minimum values for the temperature alarm.
Summary of Contents for ICON DELUXE
Page 1: ...I C O N D E L U X E...
Page 2: ...2...
