21
LUVION
Premium Baby products
EN
Camera Unit
loses link with
the Monitor
Unit
•
If the Camera Unit is too far away with low reception,
move the Camera Unit closer to the Monitor Unit.
•
Reset both units by disconnecting them from battery and
electrical power. Wait about 15 seconds, then reconnect.
•
Large metallic objects, including doors, refrigerators,
mirrors, fi ling cabinets, and also reinforced concrete, may
block the radio signal if between the Camera and Monitor
Unit.
•
The signal strength may be reduced when in close prox-
imity to radio or electrical equipment, such as TVs, com-
puters, cordless or mobile phones, fl uorescent lights or
dimmer switches.
•
Use of other 2.4GHz products, such as wireless networks
(WiFi routers), Bluetooth systems, or microwave ovens,
may cause interference with this product. Keep Camera
and Monitor Unit at least 5ft (1.5m) away from these
items, or turn them off if they appear to cause
interference.
•
Pair the Camera Unit under a diff erent channel. (refer to
page 17, chapter 5.6.2)
No picture from
a Camera Unit
•
Check all connections to the camera. Confi rm that the
adapter is plugged in.
•
Try recharging or replacing the battery pack.
•
Confi rm that all cameras and monitors are both ON.
•
Make sure that the Camera Unit is within range of the
monitor.
•
Confi rm that the Camera and Monitor Unit are paired.
•
Adjust the monitor antenna to vertical position.
No sound from
Monitor Unit
•
Volume setting may be too low. Adjust to a higher setting.
Picture is black
and white
•
Night vision LED may be ON. Night vision mode operates
in black and white.
•
Tum on room lights to force monitor out of night vision
mode.
