12.
USING TWO 5/16-18 X 1” BOLTS (ITEM #17) TWO 5/16 FLAT WASHER (ITEM #16) AND TWO 5/16-18
FLANGE NUTS (ITEM #18) INSTALL THE OUTBOARD BRACKET (ITEM #14) AS SHOWN IN FIGURE 2.
NOTE: LEAVE THIS BRACKET LOOSE AT THIS TIME.
13.
ATTACH THE STEP BOARD TO THE MOUNTING BRACKETS AS DESCRIBED IN THE INSTRUCTION
SHEET INCLUDED WITH YOUR STEP BOARD ASSEMBLY.
14.
ADJUST THE REAR OUTBOARD BRACKET FOR YOUR STEP ASSEMBLY AND TIGHTEN THE BOLTS
SECURING THE OUTBOARD BRACKET TO THE INBOARD BRACKET.
15.
USING A 5/16-18 X 1” BOLT (ITEM #17) A 5/16 FLAT WASHER (ITEM #16) AND A 5/16-18 FLANGE
NUT (ITEM #18) INSTALL THE REAR CLAMP BRACKET (ITEM #15) OVER THE CABLES FROM STEP
10 ON TO THE REAR INBOARD BRACKET.
16.
REPEAT STEPS 2 – 15 FOR THE RIGHT SIDE OF THE VEHICLE.
SERVICE PARTS LIST
ITEM
PART NO.
QTY
DESCRIPTION
1
1
STEP ASSY, GRIP STEP
2
552845
4
BRACKET-MTG, GRIP STEP, 401521
3
108442
8
WASHER – NYLON, .36” X 1.5” X .032” BLACK
4
105859
8
NUT- FLANGE, M8-1.25, ZP
5
100040
6
BOLT-HEX HD, 3/8”-16 X 1.00”, ZP
6
100062
8
WASHER-FLAT, 3/8”, ZP
7
106995
12
NUT-FLANGE, 3/8”-16, ZP
8
102592
2
WASHER-RUBBER, .354 X 1.0 X .75
9
104673
2
STUD-DBL END, 3/8”-16 X 5”
10
552843
2
BRKT-MTG, CTR, INBOARD, 401529
11
552844
2
BRKT-MTG, CTR, OUTBOARD, 401529
12
552832
1
BRKT-MTG, REAR, W2W, INBOARD, LH, 401592
13
552833
1
BRKT-MTG, REAR, W2W, INBOARD, RH, 401529
14
552125
2
BRKT-MTG, REAR, W2W, OUTBOARD, 401529
15
552754
1
BRKT-CLAMP, W2W, 401529/571529
16
106998
5
WASHER-FLAT, .375X.875X.083, BZP
17
106997
5
SCR-HEX, 5/16-18 X 1.0”, BZP
18
106996
5
NUT-FLANGE, 5/16-18, BZP
552830 SHEET 2 OF 3 16FEB15
Summary of Contents for 401529
Page 3: ......
