background image

Before using the Luvele Pure Plus Yogurt Maker remove all packaging 
material. Then remove the outer yogurt maker lid and the glass container 
with lids. Wash it in warm, soapy water, then rinse under water and 
dry thoroughly. Wipe the yogurt maker housing with a damp cloth and 
dry thoroughly. Ensure that all parts are completely dry before use.

Before assembling the yogurt maker, make sure the power is 
switched off at the power outlet and the power plug is removed from the 
power outlet.

Prepare the yogurt mixture following the desired recipe 
instructions. Refer to recipe on page 10 or visit our recipe blog at 

www.luvele.com

 for lots of gut loving, yogurt recipe ideas.

Pour the yogurt mixture into the yogurt container. Place the lid onto 
the container and secure into place. When placing the lid on the glass 
container push the vacuum button shut to keep the yogurt fresh.

Insert the glass yogurt container into the base of the yogurt 
(before adding water).

Once the container has been placed into the base, cold water can 
now be added. Pour water into the base of the yogurt maker slowly 

until it reaches the ‘tall maximum fill line indicator’ as shown on page 5. 

Do not overfill. 

INSTRUCTION | P9

INSTRUCTION | P8

Operating

S T E P 

1

S T E P 

2

S T E P 

3

S T E P 

4

S T E P 

5

!

PLEASE NOTE:

 

Do not operate your Luvele Pure Yogurt Maker 

without the supplied container or without water.

S T E P 

6

S T E P 

7

Switch the yogurt maker on by plugging the power plug into 
a power outlet. This will light up the digital display. 

Press the ‘TEM’ button to select one of the three temperature settings. 
Then press the ‘+’ or ‘-’ (TIME) button to select your incubation time 

between 1 & 24 hours. Once you have selected the temperature and 

time press the ‘CONFIRM/CANCEL’ button. The incubation period 

will start.  If you want to cancel the incubation time and temperature, 

tap the ‘CONFIRM/CANCEL’ button twice to re-set. 

What temperature should I use?

 Read more on this on page 14

Avoid moving the yogurt maker during the incubation period. Do not 
stir the yogurt mix during or at the end of the incubation period to 
avoid the yogurt curdling.

At the end of the selected incubation time, remove the lid and 
check that the yogurt has thickened and set. If the yogurt requires 
more thickening, replace the lid and set the digital timer to required 

additional incubation time. When the yogurt has thickened sufficiently, 
switch the power off at the outlet and unplug the power cord. Remove 
the yogurt container from the base and place into the refrigerator overnight to 
achieve firmly set yogurt.

PLEASE NOTE:

  

During the incubation period, condensation may appear on the inside of the 

outer lid/cover of the yogurt maker. 

This is normal due to the waterbath feature. If this occurs, be careful when 

lifting the outer lid/cover off the base that water does not spill or drip. 

Some separation of the liquid whey may occur. This is normal.

Summary of Contents for PURE PLUS LPPYM300WUS










Reviews: