background image

12

0698-5l51 B70V

-H SanitaryPlus - 01/18

en

2. Safety

The manufacturer will not be held responsible for any damages resulting from non-compliance of the overall 

documentation, in particular for damages in case of non-compliance of the operating instructions.

2.1 General safety information

Observe following regulations before accomplishing all activities.

Product safety

The pump is constructed in conformity with the state of the art and approved safety-related standards. Danger 

however can occur during use for life and health of the user or third parties or damage of the pump and other 

material assets. Therefore:
•  Operate the pump only in a technically sound state, for its proper use, and conscious of safety and hazards 

taking into account these instructions.

•  Ensure that these instructions and all associated applicable documents are complete, legible, and stored in 

a place that personnel can access at all times.

•  Refrain from any manner of working that endangers personnel or uninvolved third parties.
•  In the case of a safety-relevant malfunction, stop the pump immediately and enlist a responsible person to 

rectify the malfunction.

•  In addition to the overall documentation, observe the statutory or other safety and accident prevention regu-

lations, as well as the valid standards and guidelines of the respective operating country.

Modifications

Unless the manufacturer has provided its consent in writing, the manufacturer is not liable for interventions per-

formed by the user (modifications) on the product, such as conversion, alteration, new design, etc. Modifications 

not agreed with the manufacturer may have the following effects, among others:
•  Functional impairments on the appliance or plant
•  Damage to the appliance and other property damage
•  Environmental damage
•  Personal injuries right through to death 

Duties of the operator

Safety-conscious working

•  Operate the pump only in a technically sound state, for its proper use, and conscious of safety and hazards 

taking into account these instructions.

•  Ensure observance and monitoring of:

 -  Proper use

 -  Statutory or other safety and accident prevention regulations

 -  Safety provisions in handling hazardous substances

 -  Valid standards and guidelines in the respective country of operation

•  Provide protective equipment.

Summary of Contents for B70V-H-D SanitaryPlus

































Reviews: