Zero adjustment :
During the UVC measurement, if blank the
UVC Sensor ( 3-19, Fig. 1 ) , the Display not
show zero value, press the " Zero Button,
Logger Button " ( 3-6, Fig. 1 ) > 3 seconds,
Display will show zero value. Upon completion,
remove the sensor cover.
Type K/J thermometer
a. Function select to " Type K/J thermometer "
b. Not install the " Probe Plug " ( 3-17, 3-22 Fig. 1 ) into
the " Probe Input Socket " ( 3-7, Fig. 1 ).
c. Plug the Thermocouple Temp. Probe ( Type K Temp.
probe pr Type J Temp. probe, optional ) into " Type
K/J Probe Input Socket " ( 3-8, Fig. 1 )
The Display will show the measuring value that
sensing from the Temp. probe.
d. If the Display show the indicator " K ", it is ready
for Type K thermometer.
If the Display show the indicator " J ", it is ready
for Type J thermometer.
Remark :
The meter is defaulted to " Type K thermometer ".
If intend to select the " Type J thermometer with
default , please refer chapter 7-5 ( page 19 ).
4-2 Data Hold
During the measurement, press the " Hold Button " ( 3-3,
Fig. 1 ) once will hold the measured value & the LCD will
display a " HOLD " symbol.
Press the " Hold Button " once again will release the data
hold function.
9