Lutron Electronics PPS-9312, Operation Manual

Page: 5 / 20

2. SPECIFICATIONS
2-1 General Specifications
Display 4 digits red LED, digit size : 14 mm.
x 10, x100 indicator
Circuit Custom chip of microprocessor LSI
circuit.
Sensor type Can cooperate with optional 2, 5, 10, 20,
50, 100, 200, 400 bar two wires 4 to 20
mA pressure sensor, new calibration are
not necessary typically when change the
new sensor .
* Sensor type can make the internal
setting with default
Display units Bar, Psi, Kg/cm^2, mm Hg, inch Hg,
meter H2O, inch H2O, Atmosphere,
hPa, KPa.
* Unit can make the internal setting with
default
Accuracy ± ( 0.5% + 2 d )
* Meter only.
* Within 23 ± 5
℃ ℃
Pressure Cooperate the optional two wires ( or
sensor four wires ) 4 to 20 mA pressure
* optional
sensors ( transmitters ).
* two wires sensor : TR-PS2W-xxBAR
* Four wires sensor : PS93MA-xxBAR
Offset adjust It can make the internal Offset setting
with default.
Gain adjust It can make the internal Gain setting
with default
Input signal
* Input 4 mA = 0 pressure
from sensor
* Input 20 mA = full scale pressure
Sampling Time Approx. 1 second.
2