HomeWorks Digital 0.1% Constant Voltage Controller
®
S P E C I F I C AT I O N S U B M I T TA L
Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Controller
Architectural Dimming
3691213a 2 06.01.21
Specifications
Regulatory Approvals and Compliance
• Lutron Quality Systems registered to ISO 9001.2015
• Manufacturing facilities employ ESD reduction
practices that comply with the requirements of
ANSI / ESD S20.20
• Meets ANSI C62.41 category A surge protection
standards up to and including 4 kV
• FCC Part 15
– Class A (277 V
~
)
– Class B (120 V
~
)
• CAN ICES‑005 (A) (277 V
~
)
• CAN ICES‑005 (B) (120 V
~
)
• LED controllers need to meet certain performance
criteria in order for the completed luminaires to comply
with Title 24 2019 requirements as detailed in Joint
Appendix 8. All models meet both commercial
(at 120 V
~
/ 277 V
~
) and residential (at 120 V
~
)
performance criteria throughout their entire load
operating regions. Consult 2019 Residential
Compliance Manual, Example 6‑3 Fade‑in Lighting
for important information on meeting start‑up time
requirements with fade‑in lighting.
• Meets UL
®
8750 / CSA C22.2 No. 250.13‑14, “Light Emitting
Diode (LED) Equipment For Use in Lighting Products”
• Class 2 output; meets UL
®
1310 / CSA C22.2 No. 223‑M91
Performance
• Dimming Range: 100% to 0.1%
1
• LED lighting turns on to any dimmed level without
flashing to full brightness
• Operating Voltage: 120 / 277 V
~
at 50 / 60 Hz
• Rated lifetime of 50,000 hours at 40 °C (104 °F)
ambient temperature and maximum loading
• For rated warranty, ambient temperature (t
a
) not to
exceed 40 °C (104 °F) (maximum rated temperature)
2, 3
• Patented thermal fold back protection
• Non‑volatile memory restores all controller settings
after power failure
• Typical standby power consumption: 0.25 W at
120 V
~
and 0.4 W at 277 V
~
• Open‑circuit protected output
• Short‑circuit and overload‑protected output
• Output: 24 V
-
constant voltage at high‑end
• Output Load Range: 2 W to 96 W at high‑end
• Power Factor: > 0.90 at maximum power
• Total Harmonic Distortion (THD): < 20% at
maximum power
• NEMA 410 – 2011 compliant
• Inrush Current Limiting Circuitry: decreases circuit
breaker tripping, switch arcing and relay failure; allows
full loading of switch leg
• Inrush Current: < 2 A
• Device turn‑on time: < 100 ms from electronic off and,
< 500 ms from power off
• LHD0‑96W24V‑U controller is programmed by Lutron
manufacturing and is NOT configurable by the Lutron
QwikFig configuration system
1
Light output at 0.1% depends on installation and light engine efficacy.
2
To maintain warranty, installer is responsible for ensuring that the controller ambient temperature does not exceed 40 ºC (104 ºF).
3
Where t
a
is the temperature of the air directly surrounding the controller.
2
