1
Please Read Before Installing
RF Tabletop Keypads
HRT-
5KP-A, -C 10KP-A, -C 15KP-A, -C 6LKP-A, -C
5RL-A, -C 10RL-A, -C 15RL-A, -C 6LRL-A, -C
120/127 V ~ , 50/60 Hz (9 V adapter, -A and -C models)
Batteries: 2 AAA size, 1.5V each (-C models)
Installation Instructions
Overview
RF Tabletop Keypads are for use with
HomeWorks
sys-
tems. The keypad buttons are programmed with a per-
sonal computer using the
HomeWorks
Utility.
Up to 32 keypads, each with a unique address, can be
assigned to each
HomeWorks
RF Processor.
Important Notes
Codes:
Install in accordance with all local and national
electrical codes.
Power:
Battery-powered models (-C only):
Use only high
quality alkaline batteries, two (2) size AAA, 1.5V each.
Caution - Do not
use rechargeable batteries.
Using improperly rated batteries could damage
the RF Tabletop Keypad.
All models (-A, -C):
Use only the adapter provided by
Lutron with your RF Tabletop Keypad.
Caution -
Using an adapter not rated for the
following specifications could damage the key-
pad and possibly overheat the adapter.
• Input: 120/127 VAC, 50/60 Hz
• Output: 9 VDC/300 mA Class 2
Environment:
Ambient operating temperature:
32-104°F (0-40°C), 0-90% humidity, non-condensing.
Indoor use only.
Faceplates:
Do not paint controls or faceplates.
Cleaning:
To clean, wipe with a clean damp cloth.
DO
NOT
use any chemical cleaning solutions.
RF Device Placement:
RF Tabletop Keypads must be
located within 30 feet (10m) of an RF Signal Repeater or
an RF Processor.
Setup:
RF Tabletop Keypads will not function until they
are addressed and programmed. See the
HomeWorks
Utility online help.
HRT-5KP
HRT-5RL
HRT-10KP
HRT-10RL
HRT-15KP
HRT-15RL
HRT-6LKP
HRT-6LRL
