5-1 Auto power ON/OFF
When the lower display show " PoFF " :
1)Press the " Enter Button " ( 3-4, Fig. 1 ) once, the upper
display will show " YES ", use the " Button " ( 3-5, Fig.
▲
1 ) or " Button " ( 3-6, Fig. 1 ) to select the upper
▼
text to " no " or " YES ".
no - Auto Power Off management will disable.
YES - Auto Power Off management will enable..
2)After select the upper text to " no " or " YES ", press
the " Enter Button " ( 3-4, Fig. 1 ) will save the
setting value ( function ) with default.
* If before press the " Enter Button ", just press
the " ESC Button " ( 3-3, Fig. 1 ) will escape the
Advanced Setting procedures without saving the
value ( function ) into the circuit memory.
5-2 Change the Temp , unit
℃ ℉
When the lower display show " t-CF " :
1)Press the " Enter Button " ( 3-4, Fig. 1 ) once, the upper
display will show " C " or " F ", use the " Button "
▲
( 3-5, Fig. 1 ) or " Button " ( 3-6, Fig. 1 ) to select the
▼
upper text to " C " or " F ".
C - The Temp. unit is .
℃
F - The Temp. unit is .
℉
2)After select the upper text to " C " or " F ", press the
" Enter Button " ( 3-4, Fig. 1 ) will save the setting Temp.
unit ( , ) with default.
℃ ℉
* If before press the " Enter Button ", just press
the " ESC Button " ( 3-3, Fig. 1 ) will escape the
Advanced Setting procedures without saving the
value ( function ) into the circuit memory.
8
