* There are two kind sampling time of display, FAST
and SLOW. Push the " FAST/SLOW Button " once
( 3-4, Fig. 1 ), if the upper left corner of LCD show
" FAST " ( Fast Indicator, 3-3, Fig. 1 ), then the
display reading is under the operation of fast
sampling time.
* If the upper left corner of LCD not show the
" Fast Indicator " ( 3-3, Fig. 1 ), the display
reading is under the slow sampling time.
* Over range display of tension function, LCD
will show " "
* Over range display of compression function, LCD
will show " "
4-3 Peak Hold Measurement
The meter can measure the peak value of force both of
tension & compression operation. The operation
procedures of Peak Hold Measurement are same as above "
4-2 Normal Measurement " but should slide the " Power
Off/On/Peak Hold Switch " ( 3-8, Fig. 1 ) to the " PEAK H. "
position.
Slide the " Power Off/On/Peak Hold Switch " ( 3-8, Fig. 1 )
to the " On " position will cancel the peak hold function.
4-4 LCD Back Light On/Off
During the measurement, press and hold ( > 2 seconds )
the " Button " ( 3-15, Fig. 1 ) until LCD Back Light
is ON, then it will be off after a period time.
several seconds then off automatically
7