b. Pause the datalogger
During execute the Datalogger function , if press the
" Logger Button " ( 3-9, Fig. 1 ) once will pause the
Datalogger function ( stop to save the measuring data
into the memory circuit temporally ). In the same time
the indicator of " DATA RECORD " will stop to flash..
Remark :
If press the " Logger Button " ( 3-9, Fig. 1 ) once again
will execute the Datalogger again, the bottom text of
DATA RECORD " will flashing .
c. Finish the Datalogger
During pause the Datalogger ( or pause the Datalogger ),
Press the " LOGGER Button ( 3-9, Fig. 1 ) > 2 seconds
continuously, the " DATA RECORD " indicator will be
disappeared and finish the Datalogger.
5-3 Normal record mode
Manual Datalogger ( Set sampling time = 0 second )
a. Set sampling time is to 0 second
Press the " LOGGER Button ( 3-9, Fig. 1 ) > 2 seconds
continuously, the LCD will show the indicator " DATA
RECORD " ( not flashing ). Press the " Logger Button "
( 3-9, Fig. 1 ) once, the " DATA RECORD " indicator will
flash once a while and Beeper will sound once, at the
same time the measuring data along the time information
will be saved into the memory circuit. The lower Display
will show the Position ( Location ) no. and saved into the
SD card too.
13
