4. DETECTOR PROCEDURE
4-1 RF detector operation
1)
Connect
the
antenna( 3-5, Fig. 1 ) to the RF detector.
2)
Turn on the RF detector by Turn
ing
the " rotary switch "
( 3-6, Fig. 1 ),
ti the in position,
the power
(RED)
led
indicator
will be lit.
Turn off the RF detector by Turn
ing
the " rotary switch "
( 3-6, Fig. 1 ) to off position, the power LED indicator will
no
longer be lit.
3)
When
the RF meter is turned on it is in ready mode.
4-2 How to use the rotary switch
to
adjust sensitivity
Turn
ing
the rotary switch to find the target device.
Turn the rotary switch
clockwise
to maximum, goto standby
mode, if receiving stronger environmental then adjust the
rotary switch back,
until
no more than the fir
st
LED
is lit
.
W
hen
all
10 LED
s
are lit
,
it
means
the meter
is
closer
to the
target, we can change the detector direction,
adjusting
the
rotary switch back when the signal is strong, in this way, we
can find the target easily.
NOTE:
The FC-2601
is
a wireless
detector, for any emission
and receiv
ing
device
s
, so when us
ing
t
his meter
,
it is
recommended to
turn off
any
known signal source
s
nearby,
for
example
m
obile phones, wireless sharing devices,
radios,
modems
etc
.
to ensure the accuracy of detection.
4-3 Buzzer ON/OFF
Press the Buzzer ON/OFF Button once. to select Buzzer ON or
OFF ,when Buzzer sound select to ON and detector signal
more than the 6 led bar, the beep will be sound.
4