4. MEASURING PROCEDURE
E-field sensors
The tester meter that measures and displays EMF in Gauss and
Tesla units with a frequency bandwidth of 30 to 300Hz. The 3 axis
sensor allows for three component (xyz) measurement coverage.
The tester Meter is specifically designed to determine the magnitude of
electromagnetic fields generated by power lines, televisions,
computers electric appliances and many other similar devices.
This tester meter is shipped fully tested and calibrated and,
with proper use, will provide years of reliable service.
4-1 EMF Strength Function selection and measurement
1) Turn on the meter by pressing the " Power Button "
( 3-2, Fig. 1 ) > 1.5 seconds continuously.
*
Pressing the " Power Button " ( 3-2, Fig. 1 )
continuously and > 1.5 seconds again will turn off the
meter.
2) measurement Function select
pressing and hold the " Function Button "( 3-5, Fig. 1 ),
to select X axis,Y axis, Z axis, and XYZ axis measurement Function.
3) measurement UNIT select
pressing the " UNIT Button "( 3-5, Fig. 1 ),
to select …1. mGauss 2. µTESLA .
3) measurement Range select
pressing the " Range Button "( 3-6, Fig. 1 ),
to select …
1. 200.0 2. 2000 3. 20000 mGauss, or
1. 20.00 2. 200.0 3. 2000 µTesla.
4) measurement Procedure
1. Probe plug "(3-20 Fig1) into the meter "(3-17 Fig1) probe input.
2. Make several measurements at various locations around the work place
or the interested areas as described above. This is particularly important
if the field conditions are unknown.
6