Lutron Electronics EM-1910, Operation Manual, Page: 14 / 16

4-11 Type k Temp. measurement
1) Insert the plug of the optional Type K Temp.
probe, TP-01 into the " Type K probe socket "
( 3-12, Fig. 1 ).
2) Power on the meter, select the function to " Type K
Temp. " ( refer to chapter 4-3 ), now the meter is
ready for Type K Temp. measurement.
5. RS232 PC SERIAL INTERFACE
The instrument has RS232 PC serial interface via a 3.5
mm terminal ( 3-10, Fig. 1 ).
The data output is a 16 digit stream which can be
utilized for user's specific application.
A RS232 lead with the following connection will be
required to link the instrument with the PC serial port.
Meter PC
(9W 'D" Connector)
Center Pin............................................ Pin 4
(3.5 mm jack plug)
Ground/shield...........................................
Pin 2
2.2 K
resistor
Pin 5
12