5. STROBOSCOPE MEASURING
PROCEDURES
Caution :
* Do not use fingers or any
tool to touch the FLASH
TUBE.
* Risk of electric shock !
5-1 Preparation
1)Connect the DCV output plug of DC adapter into the
" DC 9V Power Adapter Input Socket " ( 3-2, Fig. 1 )
Connect the ACV input plug of DC adapter into the a
properly 110V AC, 220V AC or 240V AC outlet.
Caution :
* The power plug should be
connected to the correct AC
power supply.
2)Turn the power switch to " Power On/Off Switch "
( 3-1, Fig. 1 ) to the " On " position.
3)Select the " Stroboscope, Ext. Trigger, Tachometer
Switch " ( 3-4, Fig. 1 ) to the " Stroboscope " position.
4)Determine the range switch to "Low" or "High" position.
10