i. RS232 output unit code setting
1) After finish the " Gain value setting " , press the
" Set Button " ( 3-4, Fig. 1 ) once, the " Display "
will show " Unit ", now the meter is ready for the
the " RS232 output unit code " setting.
2) Use the "
Button " ( 3-5, Fig. 1 ) and the "
Button "
▼
▲
( 3-6, Fig. 1 ) to adjust the desiring " RS232 output
unit code " no., press the " Set Button " ( 3-4, Fig. 1 ) to
save the setting value.
Remark :
* During adjust the unit code no., the " SV indicator " ( 3-3, Fig. 1 )
will light.
* The RS232 output code list, please refer chapter 5, page 16.
5. RS232 PC SERIAL INTERFACE
The instrument has RS232 PC serial interface via a 3.5
mm terminal ( 3-11, Fig. 1 ).
The data output is a 16 digit stream which can be
utilized for user's specific application.
A RS232 lead with the following connection will be
required to link the instrument with the PC serial port.
Meter
PC
(3.5 mm jack plug)
(9W 'D" Connector)
Center Pin............................................
Pin 4
Ground/shield...........................................
Pin 2
Pin 5
14
