19
by Lutron
1
Identify existing wiring
Two switches control the lights (3-way installation)
2
What you need for a 3-way installation
+
WARNING! Shock Hazard.
May result in Serious
Injury or Death. Turn off power at circuit breaker
before installing the unit.
4
Turn power off at circuit breaker
5
Remove existing switch from wall
6
Tag and disconnect wires from the existing switch
Place tag - to identify wire on
different color screw
Different
Color
Screw
Access to
Neutral is
required
Ground
(Green /
Bare Copper)
3-Way Installation - Cas
é
ta Wireless ELV+ Dimmer with Pico Remote Control (PD-5NE)
Location 1
Location 2
ELV+ dimmer
PD-5NE
Pico remote control
with wall-mounting kit
PJ2-WALL
- If one switch controls the lights (single-pole installation)
See quick-start guide that came with your dimmer
-
If three or more switches control the lights
(multi-location installation)
for details
Important note:
3
Choose a location for your Caséta Wireless dimmer
Choose which location you want the Caséta Wireless dimmer installed in.
This will be Location 1.
Location 1
Location 1
Claro wallplate
CW-1
+
